ProductsServicesAbout usPartnersNewsReferencesFor Clients
EMAK 630 

EMAK 630 assemblies of modular apparatus


Range of Use
EMAK 630 modular switchboards are designed for use in dry heated rooms as distribution centers and meter boards. Small measurement and light structure support their use in bureaus, hotels, apartments, and private houses.

The corpus of the switchboard consists of the angle details of the base and side walls, where terminals and bearer cables are attached with tensile rivets. Installation and apparatus is coated by modular cover plates. As a supplement, it is possible to install a cover door to the switchboard.

Installation Systems and Measurement
It is possible to order the switchboard both of surface as well as sunk installation systems. For sunk installation system, there is a slot in the wall needed with depth of 75 mm.
Minimum measurement of the corpus are 300 x 430 x 80 mm, and maximum measurement are 2100 x 630 x 180 mm. If the cover door is used then 30 mm are added to the depth. For sunk installation system 30 mm are added to the switchboard measurement as the width of the collar. Standard heights are 300 mm, 450 mm, 600 mm, 750 mm, 900 mm, 1200 mm, 1500 mm, 2100 mm.

Technical Data:
Nominal voltage 690 V
Nominal current 630 A
Short-circuit proof  20 kA
Frequency  50 Hz
Insulation resistance > 10 M'ohm
Corpus IP 20C
Corpus with a door IP 30C